Agilent Technologies N2620A - Manual (Page 203)

System Operations 7
N2620A User’s Guide 185
Boot Password
To protect the FrameScope Pro from unauthorized use, you can
set a password. The correct password must be typed in before
the FrameScope Pro powers up. By default, the FrameScope Pro
is not password-protected.
To enable the boot password, perform the following procedure.
1 Select Boot Password and press Edit on the System Settings
Network menu.
2 Select Password checking enabled to enable the password
security.
3 If you want to type in a new password or change the existing
password:
a Select Change Password.
b Type in the password in the New Password and Confirm
New Password
fields.
4 Press OK.