Agilent Technologies N2620A - Manual (Page 249)

Network Performance Analyzer Reference 8
N2620A User’s Guide 231
Running Autotest
Press Start Test on the Network Autotest Setup screen to run the
Autotest once all the necessary editing, deleting, and adding are
done. The FrameScope Pro will then test each listed server
one-by-one and list out the rating level for each server, or
display a red ‘X’ if the server is not working or inaccessible. The
five-level rating scale is listed below.
• 1 — Bad
• 2 — Poor
• 3 — Fair
• 4 — Good
• 5 — Excellent
The rating threshold values can be viewed or changed via the
Edit
menu. Refer to “Changing the Autotest Metrics” on page 232
on how to change these values.