Agilent Technologies N2620A - Manual (Page 186)

168 N2620A User’s Guide
7 System Operations
User Interface Setup
Select User Interface and press Edit to set the user interface
preferences. The User Interface Setup screen allows you to set
the following preferences.
• Enable Touch Click: Select on or off.
• Enable Sleep Timeout: Select on or off.
A screen touch will wake the screen. When enabled, the
Sleep Interval setting bar is displayed.
• Sleep Interval (in minutes): The time interval (1 to 15
minutes) without a screen touch or button press before
the unit goes to sleep.
• Enable Speaker: Select on or off.
• Volume Control: Scale of 1 to 15.
• Contrast: Scale of 1 to 15