HP LaserJet 3100 All-in-One Printer series - Manual (Page 143)

142 8 Managing Basic Features EN
Setting send fax options
The section describes how to change options that only relate to
sending faxes. The topics include:
● Inserting a pause or wait into a fax number
● Enabling and using special dial symbols
● Programming one-touch and speed-dial keys
● Programming group dial keys
● Programming a Mercury button
● Changing fax header information
● Setting current date and time
● Adjusting how many times the HP LaserJet 3100 product
autoredials fax calls
● Adjusting the time between redials
● Choosing tone or pulse dialing
Inserting a pause or wait
You can insert pauses into a fax number you are dialing or
programming to a one-touch key, speed-dial code, or group-dial
code. Pauses are often needed when dialing internationally.
Press R EDIAL /P AUSE to enter a two-second pause in your dialing
sequence. A comma appears on the control panel display, indicating
that the pause will occur at that point in the dialing sequence.
If you enter the pause at the end of a number you are programming
into a one-touch key, speed-dial code, or group-dial code, the HP
LaserJet 3100 product waits to dial this number until you enter
another number. (This is also known as concatenated dialing.)