Sending faxes, Selecting items for faxing, copying, and scanning – HP LaserJet 3100 All-in-One Printer series User Manual
Page 67
66 3 Faxing
EN
Sending faxes
Follow the instructions below for selecting, orienting, and sending
paper faxes.
Selecting items for faxing, copying, and
scanning
The HP LaserJet 3100 product can fax, copy, and scan various types
of items, from 2 by 3.5 inches (51 by 89 mm) (the size of a business
card) to 8.5 by 30 inches (215 by 762 mm) pages. It also accepts
bond papers, onionskin papers, newspaper pages, magazine pages,
recycled papers, transparencies, items in carrier sheets and
photographs in carrier sheets.
Also, coarser papers scan more easily. While slick papers go through
the HP LaserJet 3100 product, it may be more difficult. For best
results, feed slick sheets one at a time.
You should not put anything in the HP LaserJet 3100 product that
could get stuck in or damage the feed mechanism. Observe the
following to minimize the possibility of jams.
●
Remove self-stick notes.
●
Remove staples and paper clips.
●
Straighten any curls or wrinkles from documents before putting
them into the document feeder tray.
●
Do not send any document with glue, correction fluid, or wet ink
on it.
●
Do not send gum-backed paper or labels.
●
Place documents with tears, perforations, or punch holes in a
carrier sheet.
●
Avoid multiple copy forms.