HP LaserJet 3100 All-in-One Printer series - Manual (Page 94)

EN 3 Faxing 93
Features available only through the software
All PC fax functions, settings, and tasks are controlled or performed
through the software. See the online help for more information.
Hints and help
In this section, find answers to commonly asked questions and
suggestions for getting the most out of your HP LaserJet 3100
product. See chapter 9, “Troubleshooting and Maintenance,” for a
more complete list of common fax quality and usage problems and
solutions.
What If...
I want to use more than one of the HP LaserJet 3100 product
functions at the same time? This product is specifically designed to
allow you to do many tasks simultaneously, such as print while
sending a fax.
Jobs also queue and wait until another job finishes. For example, if a
fax is being received while you are printing, the fax is stored in
memory and then prints automatically after the print job finishes. Or, if
an incoming fax is being printed, you can start sending an outgoing
fax. The outgoing fax is stored in memory and starts transmitting
when the phone line is available. Only in rare instances will the HP
LaserJet 3100 product run out of memory and cancel one job so it
can complete another.
See “Simultaneous tasking features” in appendix A for a complete list
of which features can be used at the same time.
A fax comes while I’m printing and the HP LaserJet 3100 product
is set to print faxes? When a fax is received during a print job, the
fax is stored in memory and printed after the print job finishes. In the
rare instance that the HP LaserJet 3100 product runs out of memory
while receiving the fax, it terminates the print job and prints the
incoming fax.