HP LaserJet 3100 All-in-One Printer series - Manual (Page 38)

EN 1 Set Up 37
Creating floppy disks from the CD-ROM
If you do not have a CD-ROM drive but have access to an IBM-
compatible computer with one, you can make a set of software
installation disks from the CD-ROM to use with Windows 3.1x or
Windows 95. You need at least 13 blank, formatted 1.44 MB floppy
disks.
Note If you do not have access to a CD-ROM drive, you can order the
software on floppy disks. See “Ordering software” in chapter 9.
To make installation disks
1 Insert the CD-ROM into the CD-ROM drive (usually D). If the
installation program opens, click Cancel and then Exit Setup.
2 For Windows 95: click Start, then Run.
- Or -
For Windows 3.1
x : from the File menu in Program Manager,
choose Run.
3 Type X:\English\makedisk\makedisk , replacing “ X ” with
the letter of your drive, and click OK.
4 Follow the instructions on the screen.
Uninstalling the software
The Uninstall option of the setup program allows you to remove the
HP LaserJet 3100 product software from your computer. The uninstall
option will not automatically remove your JetSuite PC Fax Phone
Books or any documents created using the HP LaserJet 3100 product
and the JetSuite Pro software.
To uninstall the software for Windows 95/NT 4.0
Note To uninstall the software from Windows NT 4.0, you must log on with
administrator privileges.
1 Click Start, select Programs, then select JetSuite Pro for the
HP LaserJet 3100.
2 Select the JetSuite Uninstall option, and then follow the
directions on the screen. The software is removed from the
computer.