HP LaserJet 3100 All-in-One Printer series - Manual (Page 160)

EN 8 Managing Basic Features 159
Changing the page stamp option
Incoming faxes print with the sender’s identification and the date and
time at the top. If you change the page stamp option to Yes, incoming
faxes are stamped with a second line repeating the sender’s
identification and date and time, but also show how many pages were
transmitted. This helps confirm that you received all pages and the
order of the pages. The default for page stamping is No.
Note If you turn on the page stamp option, make sure the autoreduction is
set to Auto or 97%. If autoreduction is turned off, a couple of lines of
each received fax page might print on a second page. See “Setting
autoreduction for incoming faxes” in this chapter.
To change the page stamp option
1 Press E NTER /M ENU .
2 Use the < and > keys to select Fax Settings and press
E NTER /M ENU .
3 Use the < and > keys to select Incoming Faxes and press
E NTER /M ENU .
4 Use the < and > keys to select Stamp Received Faxes and press
E NTER /M ENU .
5 Use the < and > keys to select Yes or No and press E NTER /M ENU .
6 Press S TOP /C LEAR to exit the Menu settings.