HP XP7 Storage User Manual
Page 120
Description
Error code (SSB2)
The Paircreate or Pairresync command was rejected because the journal volume in the specified
master journal was blocked.
3720
The Paircreate command was rejected because the emulation type of the selected volume is
unsupported.
3722
The pair cannot be created because the volume specified as the P-VOL was the system disk.
3726
The Paircreate command was rejected because it was connected with the old model and the
specified volume was unsupported.
3728
A request for Cnt Ac-J Z Paircreate was received. However, the pair could not share the volume
with Continuous Access Synchronous Z because the Cont Access Journal 3DC & 4x4 Open MF
program product was not installed in the primary system.
3729
A pair cannot be created because the secondary system does not support the combination of
multiple primary and secondary systems.
372B
The volume is inaccessible because the P-VOL is blocked.
372C
The specified volume is used in the system that consists of multiple primary and secondary systems.
Therefore the command was rejected because the delta resync operation cannot be executed.
372D
A request to create or resynchronize a pair in the system that consists of multiple primary and
secondary systems was rejected because the Cont Access Journal 3DC & 4x4 Open MF program
product was not installed in the primary system.
372E
The task failed because of one of the following reasons:
3734
•
The specified P-VOL is shared with a Compatible FlashCopy Target volume.
•
The specified P-VOL is shared with a suspended Continuous Access Synchronous Z P-VOL.
The task failed because the specified P-VOL is shared with a Compatible FlashCopy Target volume
that might not be normal due to failure.
3735
A request for pair creation was rejected because the Cont Access Journal 3DC & 4x4 Open MF
program product was not installed in the primary storage system.
3738
The pair creation failed because the status of a mirror in the journal in which the specified S-VOL
belongs is other than Initial or Stopped.
373E
The command was rejected because the specified S-VOL is used as an S-VOL in another mirror,
and the pair status is not in SSWS status.
3755
The pair cannot be created because the secondary storage system does not support the Path Gr.
ID, which was specified as other than 0.
3756
Paircreate or Pairresync is not available, because the specified journal is dedicated to a Cnt
Ac-J-Cnt Ac-S combination (2DC), and the MU# is 0.
8C13
The pair cannot be created because the specified CTG number is out of range of supporting.
8C19
The pair cannot be created or resynchronized because the specified journal ID is incorrect.
8C1A
The pair cannot be created because the specified journal ID is out of range of supporting.
8C1B
The pair cannot be created because of the one of following reasons:
8C1E
•
The microcode version of the specified primary storage system does not support connection
with the specified secondary storage system.
•
The specified primary storage system does not support connection with the specified secondary
storage system
The request to update options was rejected because the specified journal ID or mirror ID is
incorrect.
8C20
The pair cannot be created because the specified volume was an external volume.
8F00
The command was rejected because an internal logical error occurred.
8F04
120 Cnt Ac-J Z troubleshooting