HP XP7 Storage - Manual (Page 88)

Description Operation Displayed
The status of the pair was changed from Hold to Duplex because
of an operation from the primary system. Status Change by MCU(Hold to Duplex)
The status of the pair was changed from Hold to Pending because
of an operation from the primary system. Status Change by MCU(Hold to Pending)
The status of the pair was changed from Hold to unpaired
(Simplex) because of an operation from the primary system. Status Change by MCU(Hold to SMPL)
An operation for releasing a pair has been started at the
secondary system. The status of the pair changes from Hold to
unpaired (Simplex). Status Change by RCU(Hold to SMPL; Delete Pair
Start)
The status of the S-VOL was changed to Hold because of a delta
resync operation. Status Change to Hold
The status of the pair was changed from Suspend to Pending
because of an operation from the primary system. Status Change by MCU(Suspend to Pending)
The system could not identify the type of the operation. Unknown
Saving pair information to a text file
You can save pair status and other information to a tab-delimited TSV file.
Procedure 20 To save pair information
1. In the Remote Replication window, click More Actions > Export.
2. If necessary, follow instructions in online Help.
Monitoring journal (mirror) status
The status of a mirror associated with a journal relates to the pair operations that have been
performed on the journal. Monitoring these statuses can help you resolve problems and maintain
the Continuous Access Journal Z system.
Procedure 21 To view journal status
1. In the Storage Systems tree, click Replication > Journal.
2. In the Journal window, select the journal you want to monitor.
3. Click the Mirror tab and view the journal’s status.
Mirror status definitions
Description Status
Data volumes are registered in the mirror. Initial
The mirror has pairs that are synchronized, or the initial copy is in progress. Active
If a mirror in Active status contains pairs that are split, a warning appears. The split pairs must
be re-synchronized.
The mirror status is Active; some pairs in the mirror are split. Active (Warning)
The status at the beginning of a mirror-split operation. The status changes immediately to Halting.
HaltAccept indicates status of restore journals only. HaltAccept
An operation for splitting or deleting the mirror is in progress. Halting
• Splitting a mirror changes the status in the following order: Halting, Halt, Stopping, and finally
Stopped.
•
Deleting a mirror changes the status in the following order: Halting, Halt, Stopping, Stopped,
and finally Initial.
An operation for splitting or deleting the mirror is in progress. Halt
88 Monitoring the Cnt Ac-J Z system