HP XP7 Storage - Manual (Page 54)

The selected journals display in the Journals table on the Add Journals window. Yes indicates
the journals can be registered (not previously registered). No indicates that journals were
previously registerred and cannot be registered again.
11. For Remote Command Device, select the remote command device CU number and the LDEV
number. No selection can be made if a remote command device has already been specified.
12. To register journals located in another storage system, select Add above the disabled Storage
System table to the right.
13. The new Journals table is enabled. Repeat Steps 8 through 11. You can add journals from a
total of four storage systems to the EXCTG.
14. To remove a journal from a table, select the journal and click Clear.
15. Click Finish.
16. In the Confirm window, check your settings and enter a task name in Task Name.
17. Click Apply.
54 Using extended consistency groups