HP XP7 Storage User Manual
Page 124
Description
Error code (SSB2)
The command was rejected because the specified secondary journal is already a secondary
journal in another mirror.
E898
The command was rejected because the path between the storage devices for the both-way was
not defined. Check whether the bidirectional normal path was defined or not.
E89A
The command was rejected because the specified master journal or the restore journal remembered
the state of connection with another system in the past. Specify another journal, or delete the
journal once, then retry the registration again.
E89B
The command was rejected because the Serial Number, Controller ID, or Path Gr. ID of the
specified secondary storage system is wrong.
E8A2
The specified journal ID is unregistered.
E8A6
Journal volume is unregistered on the specified journal.
E8A7
The command was rejected because the specified volume was not for a Cnt Ac-J Z pair or was
a volume of another journal.
E8A8
Cnt Ac-J Z copy pair cannot be suspended because of the power-on processing.
E8A9
The command was rejected because the mirror ID of the specified restore journal was already
used.
E8B6
The command was rejected because the volume in the specified journal was used for maintenance.
E8B8
The command was rejected because there are multiple journals in the specified consistency group.
E8F7
The command was rejected because the specified P-VOL was already used as an S-VOL.
EA00
The command was rejected because the specified P-VOL was already used by another Cnt Ac-J
Z pair.
EA01
The command was rejected because the specified S-VOL was used as the P-VOL.
EA02
The command was rejected because the specified P-VOL was already used by another Cnt Ac-J
Z pair.
EA03
The command was rejected because the number of the Cnt Ac-J Z pair registrations in the primary
journal exceeds the upper limit.
EA07
The command was rejected because the number of Cnt Ac-J Z pair registrations in the secondary
journal exceeds the upper limit.
EA08
The command was rejected because the state of master journal was other than Initial, Active, or
Stopped.
EA09
The command was rejected because the state of restore journal was invalid.
EA0A
The command was rejected because the specified S-VOL was not in SSWS status.
EA12
The command was rejected because the request was received for the S-VOL as the P-VOL.
EA13
The command was rejected because the request was received for the P-VOL as the S-VOL.
EA15
The command was rejected because the pair status was not Suspend.
EA18
The command was rejected because the state of journal was not Stopped.
EA19
The command was rejected because the journal could not execute the suspend transition, that is,
the journal was in HLDE or PSUE status.
EA1B
The command was rejected because the specified secondary journal was not in the Stopped
status.
EA1C
The command was rejected because the request was received for the S-VOL as the P-VOL.
EA1E
The command was rejected because the request was received for the P-VOL as the S-VOL.
EA20
The command was rejected because the state of journal was not Stopped.
EA22
124
Cnt Ac-J Z troubleshooting