HP XP7 Storage - Manual (Page 87)

Description Operation Displayed
Restoring of the pair was finished. Resume Pair Complete
Splitting (Suspending) of the pair was started. Suspend Pair Start
Splitting (Suspending) of the pair was finished. Suspend Pair Complete
The pair was split (suspended) because of a failure. Suspend Pair(Failure)
Release of the pair was started. Delete Pair Start
Release of the pair was finished. Delete Pair Complete
The status of the pair was changed from unpaired (Simplex) to
Pending because of an operation from the primary system. Status Change by MCU(Simplex to Pending)
The status of the pair was changed from unpaired (Simplex) to
Duplex because of an operation from the primary system. Status Change by MCU(Simplex to Duplex)
The status of the pair was changed from Pending to Duplex
because of an operation from the primary system. Status Change by MCU(Pending to Duplex)
The status of the pair was changed from Pending to Suspend
because of an operation from the primary system. Status Change by MCU(Pending to Suspend)
The status of the pair was changed from Duplex to Suspend
because of an operation from the primary system. Status Change by MCU(Duplex to Suspend)
The status of the pair was changed from Duplex to unpaired
(Simplex) because of an operation from the primary system. Status Change by MCU(Duplex to Simplex)
The status of the pair was changed from Pending to unpaired
(Simplex) because of an operation from the primary system. Status Change by MCU(Pending to Simplex)
The status of the pair was changed from Suspend to unpaired
(Simplex) because of an operation from the primary system. Status Change by MCU(Suspend to Simplex)
The status of the pair was changed from Suspend to Pending
because of an operation from the primary system. Status Change by MCU(Suspend to Pending)
The status of the pair was changed because an operation for
splitting a pair started at the secondary system. Status Change by RCU(Suspend Pair Start)
The status of the pair was changed because an operation for
splitting a pair finished at the secondary system. Status Change by RCU(Suspend Pair Complete)
An operation for releasing a pair has been started at the
secondary system. The status of the pair changes from Suspend
to unpaired (Simplex). Status Change by RCU(Suspend to SMPL; Delete Pair
Start)
An operation for releasing a pair has been started at the
secondary system. The status of the pair changes from Pending
to unpaired (Simplex). Status Change by RCU(Pending to SMPL; Delete Pair
Start)
An operation for releasing a pair has been started at the
secondary system. The status of the pair changes from Duplex
to unpaired (Simplex). Status Change by RCU(Duplex to SMPL; Delete Pair
Start)
The status of the pair was changed because an operation for
releasing a pair finished at the secondary system. Status Change by RCU(Delete Pair Complete)
A pair became ready for delta resync. Ready for Delta resync
The failure occurred with the pair which was ready for delta
resync. Ready for Delta resync(Failure)
The status of the P-VOL was changed to Hold because of a delta
resync operation. Status Change for Delta resync
The status of the pair was changed from unpaired (Simplex) to
Hold because of an operation from the primary system. Status Change by MCU(SMPL to Hold)
Monitoring Cnt Ac-J Z operations history 87