HP XP7 Storage - Manual (Page 121)

Description Error code (SSB2)
The pair cannot be created because the specified P-VOL is one of the following: 8F10
• A BC Z S-VOL that is not in Split/SUSPOP status
•
A BC Z volume in Reverse Copy status
• A Compatible FlashCopy volume
The pair cannot be created. The processing of volume migration could not be stopped because
the P-VOL was being migrated by Auto LUN. 8F11
The pair cannot be created because the specified volume was in the state of online from the host. 8F17
The pair cannot be created because the specified volume was used in a pair on another program
product. 8F18
The pair cannot be created because the emulation type of the specified volume was unusable. 8F19
The pair cannot be created because the specified P-VOL is already paired. 8F1B
The pair cannot be created because the specified P-VOL is not in the Suspend status. 8F1C
The pair cannot be created or resynchronized because of the one of following reasons. 8F21
•
The specified volume was a Cnt Ac-S Z P-VOL.
• The specified volume was a Cnt Ac-S Z S-VOL belonging to a consistency group consisting of
multiple primary and secondary storage systems.
•
Unavailable configuration of the status transition.
The pair cannot be created because a path between the devices was not created. 8F24
The pair cannot be created or resynchronized because PIN was existed in the specified volume. 8F25
The pair cannot be created or resynchronized because it could not access to the specified P-VOL
or S-VOL. 8F28
The pair cannot be created because the specified master journal was unusable. 8F29
The Cnt Ac-J Z pair cannot be created nor resynchronized because of the one of following reasons. 8F2A
•
The specified P-VOL is used by Compatible FlashCopy.
• The specified P-VOL is TSE-VOL or being used by Compatible FlashCopy SE.
The pair cannot be created because the protect attribute of the Data Retention was set for the
specified P-VOL. 8F2B
The pair cannot be created because the specified volume was used in a pair on the Continuous
Access Synchronous Z or the Business Copy Z. 8F33
The pair cannot be created because the specified volume was blocked. 8F35
The following programs for Mainframe systems might not be installed, or the licenses of them
might be expired. Please confirm settings for: 8F38
•
Continuous Access Synchronous Z
•
Continuous Access Journal Z
The pair cannot be created because the program product of Cnt Ac-J Z was not installed. 8F39
The pair cannot be created because cache CL2 is in abnormal status. 8F46
The pair cannot be created because cache CL1 is in abnormal status. 8F47
The pair cannot be created or resynchronized due to the following contributing factors: 8F4D
•
A journal is not registered in the secondary storage system.
• A volume in the journal which is registered in the secondary storage system is blocked.
The pair cannot be created or resynchronized because the load of the processing was high. Wait
about 5 minutes, then retry the operation. 8F50
Troubleshooting with RAID Manager 121