HP XP7 Storage - Manual (Page 57)

Procedure 3 To remove all journals from an EXCTG
1. In the Storage System tree, click Replication > Journal.
2. Select the EXCTGs tab.
3. Click Initialize EXCTG.
4. In the Initialize EXCTG window, enter a Task Name and review the journals in the EXCTG to
be deleted.
5. To remove all journals, click Apply.
Forcibly removing journals
Remove journals using the instructions in “Removing journals from an EXCTG ” (page 56) . Use the
procedure below when that procedure fails to remove the journals.
Procedure 4 To remove journals forcibly
1. In the Storage System tree, click Replication > Journal.
2. Select the Journals tab.
3. From the Actions menu, click Journal > Force Remove Journals from EXCTG.
4. From the Selected Journals table, check the journal or journals to be removed. Click Cancel
to cancel and return to the Journals table.
5. Click Finish.
Using EXCTGs with different model storage systems
Cnt Ac-J Z can perform remote copy operations from more than one primary system to more than
one secondary system using EXCTGs. Both the primary and secondary systems can be a mix of
XP7, P9500, and XP24000/XP20000 Disk Array.
•
There is no restriction on which system should be the local or remote when pairing:
XP7 and P9500 ◦
◦ XP7 and XP24000/XP20000 Disk Array
•
There is no limitation on the journals that can be registered in the EXCTG when the supervisor
DKC is XP7 and the subordinate DKC is P9500 or XP24000/XP20000 Disk Array. All journals
Using EXCTGs with different model storage systems 57