Send a fax using monitor dialing, Send a fax, Using monitor dialing – HP Photosmart 3310 All-in-One Printer User Manual

Page 140

Advertising
background image

Tip

If the most recently sent black-and-white fax is stored in memory, the

second option on the

Fax Mode

screen enables you to send the fax in

memory.

5.

When prompted, load your original print side down on the right front corner of the
glass.

Tip

If you are sending the fax directly to a fax machine, and will not be

speaking with a recipient before sending the fax, you might find it more
convenient to load the first page of your original on the glass before
initiating the fax call.

6.

Press

Start Black

.

Note

If you were speaking with the recipient before sending the fax,

inform the recipient that they should press Start on their fax machine after
they hear fax tones.

7.

When the

Another Page?

prompt appears, do the following:

If you have another page to fax
a.

Press

1

to select

Yes

.

b.

When prompted, load the next page of your original print side down on the
right front corner of the glass.

c.

Press

Start Black

.

If you do not have another page to fax
➔ Press

2

to select

No

.

The telephone line is silent while the fax is transmitting. At this point, you can
hang up the telephone. If you want to continue speaking with the recipient,
remain on the line until the fax transmission is complete.

Send a fax using monitor dialing

Monitor dialing allows you to dial a number from the control panel as you would dial a
regular telephone. When you send a fax using monitor dialing, you can hear the dial
tones, telephone prompts, or other sounds through the speakers on your HP All-in-
One. This enables you to respond to prompts while dialing, as well as control the pace
of your dialing.

Tip

If you want to use monitor dialing to send a fax with a calling card, HP

recommends you create a speed dial entry to store the personal identification
number (PIN) for your calling card. If you do not store the PIN in a speed dial
entry, you might not be able to enter the PIN fast enough. The HP All-in-One
might begin transmitting fax tones before you are able to finish entering your
PIN, and the call will fail.

You can send a black-and-white or color fax using monitor dialing. This section
provides instructions for sending the fax in black and white.

User Guide

137

Fax

Advertising