HP Photosmart 3310 All-in-One Printer - Manual (Page 77)

View and print network settings
You can display a summary of the network settings on the HP All-in-One control
panel, or you can print a more detailed configuration page. The network configuration
page lists all of the important network settings such as the IP address, link speed,
DNS, and mDNS. For information on the network settings, see
Network configuration
page definitions .
1. Press Setup .
2. Press until Network is highlighted, then press OK .
The Network Menu appears.
3. Do one of the following:
–
To display wired network settings, press 1 , then press 2 .
This selects Display Summary and then displays a summary of the wired
(Ethernet) network settings.
– To display wireless network settings, press 1 , then press 3 .
This selects Display Wireless Summary and then displays a summary of
the wireless network settings.
– To print the network configuration page, press 1 , then press 1 again.
This selects View Network Settings and then prints the network
configuration page.
Restore network defaults
You can reset the network settings to what they were when you purchased your
HP All-in-One.
Caution This will erase all wireless setup information that you have entered.
In order to restore this information, you will need to run the Wireless Setup
Wizard again.
1. Press Setup .
2. Press until Network is highlighted, then press OK .
The Network Menu appears.
3. Press 2 , and then press 1 or OK to confirm.
This selects Restore Network Defaults .
Turn the wireless radio on and off
The wireless radio is on by default, as indicated by the blue light on the front of the
HP All-in-One. In order to stay connected to a wireless network, the radio must stay
on. However, if your HP All-in-One is connected to a wired network or you have a
USB connection, the radio is not used. In this case you might want to turn the radio off.
1.
Press Setup .
2. Press until Network is highlighted, then press OK .
The Network Menu appears.
3. Press 5 , then press 1 to turn the radio on, or press 2 to turn the radio off.
This displays the Wireless Radio menu and then turns the radio on or off.
Chapter 4
74 HP Photosmart 3300 All-in-One series
Netw
ork
setup