HP Photosmart 3310 All-in-One Printer - Manual (Page 143)

Note If Backup Fax Reception is enabled and you turn off the HP All-in-
One, all faxes stored in memory are deleted, including any unprinted faxes that
you might have received while the HP All-in-One was in an error condition.
You will need to contact the senders to ask them to resend any unprinted
faxes. (For a list of the faxes you have received, print the fax log. The fax log,
containing a list of the numbers from which you have received faxes, is not
deleted when the HP All-in-One is turned off. For more information on the fax
log, see the onscreen
HP Image Zone Help .)
To set backup fax reception from the control panel
1.
Press Setup .
2. Press 4 , and then press 5 .
This displays the Advanced Fax Setup menu and then selects Backup Fax
Reception .
3. Press to select On , On Error Only , or Off .
4. Press OK .
Reprint received faxes from memory
If you set the Backup Fax Reception mode to On , the HP All-in-One stores faxes it
receives in memory, whether the device has an error condition or not. For more
information on
Backup Fax Reception , see Set up backup fax reception .
Note The HP All-in-One deletes all the faxes stored in its memory when you
turn off the HP All-in-One. You can also delete the faxes from memory by
clearing the fax log from the
Setup Menu , or changing the Backup Fax
Reception mode to Off . For more information, see the onscreen HP Image
Zone Help .
Depending on the sizes of the faxes in memory, you can reprint up to eight of the
most recently printed faxes, if they are still in memory. For example, you might need
to reprint your faxes if you lost the copy of your last printout.
1.
Make sure you have paper loaded in the main tray.
2. Press Setup .
3. Press 5 , and then press 7 .
This displays the Tools menu and then selects Reprint Faxes in Memory .
The faxes are printed in the reverse order they were received with the most
recently received fax printed first, and so on.
4. If you want to stop reprinting the faxes in memory, press Cancel .
Print reports
You can set up your HP All-in-One to print error reports and confirmation reports
automatically for each fax you send and receive. You can also manually print system
reports as you need them; these reports provide useful system information about your
HP All-in-One.
For more information on the system reports you can generate, see the onscreen
HP Image Zone Help .
Chapter 11
140 HP Photosmart 3300 All-in-One series
Fax