Connection information, Supported connection types, Connection – HP Photosmart 3310 All-in-One Printer User Manual

Page 32: Information

Advertising
background image

Note

If you select

Off

, you will not hear a dial tone, fax tones, or

incoming ring tones. With the

Ring and Beep Volume

set to

Off

, you

cannot send a fax using monitor dialing, such as when using a calling card
to send a fax. For more information on monitor dialing, see

Send a fax

using monitor dialing

.

4.

Press

OK

.

Connection information

Your HP All-in-One comes equipped with a USB port so you can connect directly to a
computer using a USB cable. You can also connect your HP All-in-One to either a
wired or wireless network. If you insert an HP bt300 or HP bt400 series Bluetooth

®

Wireless Printer Adapter into the front USB port, Bluetooth

®

devices such as PDAs

and camera phones can print to your HP All-in-One.

Note

In the remainder of this chapter, the HP bt300 or HP bt400 series

Bluetooth

®

Wireless Printer Adapter is referred to simply as an HP Bluetooth

®

adapter.

Supported connection types

Description

Recommended
number of
connected
computers for best
performance

Supported software
features

Setup instructions

USB connection

One computer
connected with a
USB cable to the
USB port on the back
of the HP All-in-One.

All features are
supported.

Follow the Setup
Guide for detailed
instructions.

Ethernet (wired)
connection

Up to five computers
connected to an
HP All-in-One using a
hub or router.

All features are
supported.

Follow the Setup
Guide and

Connect

to a network

in this

User Guide for
detailed instructions.

802.11b or g
(wireless) connection

Up to five computers
connected using an
access point.
(infrastructure mode)

All features are
supported

Follow the Setup
Guide and

Connect

to a network

in this

User Guide for
detailed instructions.

User Guide

29

Finish

setup

Advertising