Software installation troubleshooting – HP Photosmart 3310 All-in-One Printer User Manual
Page 162
Software installation troubleshooting
If you encounter a problem during software installation, see the topics below for a
possible solution. If you encounter a hardware problem during setup, see
.
During a normal installation of the HP All-in-One software, the following events occur:
1.
The HP All-in-One software CD-ROM runs automatically.
2.
The software installs.
3.
Files are copied to your computer.
4.
You are requested to connect the HP All-in-One to your computer.
5.
A green OK and check mark appear on an installation wizard screen.
6.
You are requested to restart your computer.
7.
The
Fax Setup Wizard
(Windows) or
Fax Setup Utility
(Mac) runs.
8.
The registration process runs.
If any of these things did not occur, there might be a problem with the installation.
To check the installation on a Windows computer, verify the following:
●
Start the
HP Solution Center
and check to make sure the following buttons
appear:
Scan Picture
,
Scan Document
,
Send a Fax
. If the icons do not appear
immediately, you might need to wait a few minutes for the HP All-in-One to
connect to your computer. Otherwise, see
Some of the buttons are missing in the
.
For information on starting the
HP Solution Center
, see the onscreen
HP Image
Zone Help
that came with your software.
●
Open the Printers dialog box and check to see that the HP All-in-One is listed.
●
Look in the system tray at the far right of the Windows taskbar for an HP All-in-
One icon. This indicates that the HP All-in-One is ready.
When I insert the CD-ROM into my computer’s CD-ROM drive, nothing happens
Solution
If the installation does not run automatically, you can start it manually.
To start the installation from a Windows computer
1.
From the Windows
Start
menu, click
Run
.
2.
In the
Run
dialog box, enter
d:\setup.exe
(if your CD-ROM drive is not
assigned to drive letter D, enter the appropriate drive letter), and then click
OK
.
To start the installation from a Mac
1.
Double-click the CD icon on your desktop to view the contents of the CD.
2.
Double-click the Setup icon.
The minimum system checks screen appears (Windows)
Solution
Your system does not meet the minimum requirements to install the
software. Click
Details
to see what the specific problem is, and then correct the
problem before attempting to install the software.
User Guide
159
Troubleshooting