HP Photosmart 3310 All-in-One Printer - Manual (Page 93)

The Printer Not Found screen appears during installation
The Network Menu appears.
c. Press 5 , then press 1 to turn the radio on.
4. If the radio is on, or goes on as a result of step 2, press the On button to turn
off the HP All-in-One, and then press it again to turn it on. Also, turn off the
power on your router and then turn it on again.
(Wireless) There is radio interference.
If there is a long distance between your computer and the HP All-in-One, move
them closer together. If possible, provide a clear path between the computer and
print server, and minimize sources of radio interference. Devices such as cordless
phones and microwave ovens might also cause radio interference.
(Wireless) AutoIP/DHCP has not finished running.
It might take a few minutes for the wireless connection to reestablish. Wait five
minutes and try again to make the network connection.
(Wireless) The wrong network is selected.
Print the network configuration page, and verify that the SSID matches the SSID of
the access point. For more information, see
View and print network settings . Also,
make sure to change the SSID name of the access point to something other than
the default name provided by the manufacturer.
Chapter 4
(continued)
90 HP Photosmart 3300 All-in-One series
Netw
ork
setup