Cirrus Logic CS4970x4 - Manual (Page 102)

CS4953x4/CS4970x4 DSP Manager API Description
CS4953x4/CS4970x4 System Designer’s Guide
DS810UM6 Copyright 2013 Cirrus Logic, Inc 7-9
0x0009 DSP_CFG_VIRTUALIZER
Bit 31:16 = VIRTUALIZER MODE
0x00 = MODE0.
0x01 = MODE1
0x02 = MODE2
0x03 = MODE3
0x04 = MODE4
Bit 15:0 = VIRTUALIZER ID
0x00 = none
Other values determined by enumeration type created by flash image tool
(Flasher).
0x0000A DSP_CFG_PPM
Bit 15:0 =PPM ID
0x00 = none
Other values determined by enumeration type created by flash image tool
(Flasher).
0x0000B DSP_CFG_PPM_MODE1
Bit 31:16= Module 2 mode
Bit 15:0 = Module 1 mode
Note: The module numbers are defined in DSP Condenser at Design time in the
flash_image.xml file. Module IDs and Module Numbers for custom PPMs can be
defined at Design time as well. See examples of how to change modes in
Section
7.4.2.1. .
0x0000C DSP_CFG_PPM_MODE2
Bit 31:16 = Module 4 mode
Bit 15:0 = Module 3 mode
The module numbers are defined in DSP Condenser at Design time in the
flash_image.xml file. Module IDs and Module Numbers for custom PPMs can be
defined at Design time as well. See examples of how to change modes in
Section
7.4.2.1. .
0x0000D DSP_CFG_PPM_MODE3
Bit 31:16 = Module 6 mode
Bit 15:0 = Module 5 mode
The module numbers are defined in DSP Condenser at Design time in the
flash_image.xml file. Module IDs and Module Numbers for custom PPMs can be
defined at Design time as well. See examples of how to change modes in
Section
7.4.2.1. .
0x0000E DSP_CFG_PPM_MODE4
Bit 31:16 = Module 8 mode
Bit 15:0 = Module 7 mode
The module numbers are defined in DSP Condenser at Design time in the
flash_image.xml file. Module IDs and Module Numbers for custom PPMs can be
defined at Design time as well. See examples of how to change modes in
Section
7.4.2.1. .
0x0000F DSP_CFG_PPM_MODE5
Bit 31:16 = Module 10 mode
Bit 15:0 = Module 9 mode
The module numbers are defined in DSP Condenser at Design time in the
flash_image.xml file. Module IDs and Module Numbers for custom PPMs can be
defined at Design time as well. See examples of how to change modes in
Section
7.4.2.1. .
Table 7-4. DSP_CFG_xxx Firmware Configuration Registers (Continued)
Index Variable Description