4 creating a condenser project using a model, 1 using the wizard to create a project, 5 creating a condenser project using a model -13 – Cirrus Logic CS4970x4 User Manual
Page 123: 1 using the wizard to create a project -13
8-13
Copyright 2013 Cirrus Logic, Inc.
DS810UM6
Creating a Condenser Project using a Model
CS4953x4/CS4970x4 System Designer’s Guide
8.4 Creating a Condenser Project using a Model
8.4.1 Using the Wizard to Create a Project
1. Install the DSPcondenser.exe and the required firmware modules into the cs4953x_eval_kit install
directory (Eg: C:\CirrusDSP).
2. Open dspcondenser wizard from the Start Menu
CirusDSP.c .
3. To create a new project, Click on File
New project.
4. Type a suitable project name. Choose the appropriate model. The models basically provide a
starting point with example configurations for the project.
•
Sample model corresponds to a project with unlicensed technologies (suitable for CS4953x4,
CS4970x4)
•
Sample_licensed_legacy model corresponds to a project with legacy licensed firmware modules
(suitable for CS4953x4)
•
Sample_licensed model corresponds to a project with legacy and HD licensed firmware modules
(suitable for CS4970x4)
This creates a project with the provided project name in
C:\CirrusDSP\DSPCondenser\projects\<project_name>