3 audio input interfaces, 1 introduction, 2 digital audio input port description – Cirrus Logic CS4970x4 User Manual

Page 67: 1 dai pin description, Chapter 3. audio input interfaces -1, 1 dai pin description -1, Table 3-1. digital audio input port -1, Chapter 3, "audio input interfaces, Chapter 3 audio input interfaces 3.1 introduction

Advertising
background image

Introduction

CS4953x4/CS4970x4 System Designer’s Guide

DS810UM6

Copyright 2013 Cirrus Logic, Inc

3-1

Chapter 3

Audio Input Interfaces

3.1 Introduction

CS4953x4/CS4970x4 support a wide variety of audio data formats through various input and output ports.
Hardware availability is entirely dependent on whether the software application code being used supports
the required mode. This data sheet presents most of the modes available with the CS4953x4/CS4970x4
hardware. However, not all of the modes are available with any particular piece of application code. The
Application Note that serves as the User’s Guide for the particular code being used should be consulted
when determining if a particular mode is supported. In addition, if a particular mode is desired that is not
presented here or in the Cirrus Logic firmware application note, please contact your sales representative
regarding its availability.

3.2 Digital Audio Input Port Description

The CS4953x4/CS4970x4 Digital Audio Input ports (DAI1 and DAI2) are designed to provide five digital
audio input pins (10 channels total) that can be configured to load audio samples in a number of formats,
or accept multiple stereo channels on a single input port.

DAI features include:

Five digital audio input pins capable of supporting many audio formats

Two independent input clock domains (DAI1_SCLK/DAI1_LRCLK or DAI2_SCLK/DAI2_LRCLK)

Up to 32-bit data widths

Sample rates up to 192 KHz

Two simultaneous serial compressed audio data inputs in IEC61937 format for dual-decode support

2, 4, or 6 channels on a single pin (DAI_DATAx)

Simultaneous 8-channel PCM for multichannel DVD audio and compressed audio

3.2.1 DAI Pin Description

The digital audio input port (DAI) on CS4953x4/CS4970x4, is used for both compressed and PCM digital
audio data input.

Table 3-1

shows the mnemonic and pin description of the pins associated with the DAI

port on the CS4953x4/CS4970x4.

Table 3-1. Digital Audio Input Port

Pin Name

Pin Description

LQFP-144

Pin #

LQFP-128

Pin #

Pin Type

DAI1_LRCLK

Sample Rate Clock 1 PCM Audio Input Sample
Rate (LeftRight) Clock
DAI1_LRCLK is the sample rate input clock for
the serial PCM audio data on DAI_DATA[3:0].

138

30

Input

DAI1_SCLK

Bit Clock 1 PCM Audio Input Bit Clock
DAI1_SCLK is the bit clock input for the serial
PCM audio data on DAI_DATA[3:0]..

137

29

Input

Advertising
This manual is related to the following products: