AT&T 2400 User Manual
Intuity, Integration with nec® neax, 2400 switch
Advertising
Table of contents
Document Outline
- Table of Contents
- About This Document
- 1. Introduction and Requirements for Integration
- 2. Switch Integration Device Basics
- 3. Switch Integration Planning
- Determining the Number of Voice Mail Ports
- Setting the Message Desk Number
- Setting the Calling Party Identification Pad Strin...
- Setting the Message Waiting Indicator Pad String
- Setting the Message Waiting Indicator Feature
- Determining the Message Center Interface Baud Rate...
- Determining the SMDI Baud Rate
- Determining the Extension/Logical Terminal Number ...
- 4. Hardware Installation
- 5. Installing SID Software on the INTUITY System
- 6. Administering the INTUITY System for the NEAX Inte...
- 7. NEAX 2400 Switch Administration
- 8. Switch Integration Device Administration
- 9. Acceptance Tests
- 10. Cut-to-Service
- A. Troubleshooting and Error Logs
- B. Using Views During Integration
- C. Switch Administration for INTUITY Lodging
- Abbreviations
- Glossary
- Index