AT&T 2400 - Manual (Page 120)

A-8 Issue 2 December 1995
From time to time, you may need to purge your error logs. You can purge error
logs on the SID if you have authorization to access security level 1 features. Use
the following instructions to purge error logs.
1. Press to access the Main Menu.
2. Press to select Logs. After you press the key, you see the Logs menu
as shown in the following example:
0
3. Press to select Purge. After you press the key, you see the screen
shown in the following example:
0
4. Press to cancel the purge. The SID save the error logs.
Press to erase the error logs.
The SID starts to record new error messages after you purge the old logs.
After the SID completes the purge, you see the following message on the
screen:
0
LOGS 1-View 2-Purge
PURGE LOGS? 1-Yes 2-No
Purging Logs...
FUNC
5
2
2
1