AT&T 2400 - Manual (Page 84)

7-14 Issue 2 December 1995
NEAX 2400 Switch Administration
4. Enter the port assignment number in the DATA field. Use Table 7-1 to
determine the port assignment for the MCI link.
To use the chart, find the port number you want to use under the Port
heading. When you find the port number, find the Data value in the Data
column across from the port number. One port is reserved for the MAT.
The example in Figure 7-8. uses port 1 (Data 02).
5. After entering the information, press to exit the screen and return to the
Installation Commands menu as shown in Figure 7-6.
If you need more information for any of the screen fields or processes used in this
section, contact your switch administrator or consult the documentation supplied
with your switch.
Table 7-1. Port Assignment Data Field Values
Port Data Bit
MAT Terminal
1 02 1
2 04 2
3 08 3
4 20 4
5 40 5
/