AT&T 2400 - Manual (Page 131)

Issue 2 December 1995 C-3
Voice Mail Administration
3. If your switch has password capability, assign a password to the new
extension.
4. Assign to the new extension, the service: ldg_ni_vm
a. Log on to the INTUITY system as sa or craft.
b. From the INTUITY Administration menu select the following
sequence:
c. From the Voice Equipment screen, press (F8) then
(F3).
d. Select Services to Called Numbers from the Assign menu.
e. Press (F2) and select ldg_ni_vm.
f. Enter the called number that was administered on the switch for this
purpose.
g. Press (F3). A command-output screen appears confirming
your choice.
h. Press (F6) three times to exit to the Voice Equipment
screen.
5. If the phantom extension is to be accessed from outside your system,
assign the extension to a Direct-Inward-Dialing number.
6. Provide the Lodging message retrieval number to your subscribers for the
Lodging application.
Voice Mail Administration
Voice mail is enabled when the switch sends a guest’s call to a coverage path.
The following procedure, however, provides a separate number that can be used
at any time to send voice mail to a guest.
To provide this service:
1. Administer on your switch a phantom number. This number is used to
send voice messages to your subscribers.
2. Configure the phantom number so that the INTUITY system hunt group
covers all calls.
Voice Equipment
>Voice System Administration
CHG-KEYS
ASSIGN
CHOICES
SAVE
CANCEL