AT&T 2400 - Manual (Page 132)

C-4 Issue 2 December 1995
3. Assign to the new extension, the service: ldg_ni_ca as follows:
a. Log on to the INTUITY system as sa or craft.
b. From the INTUITY Administration menu select the following
sequence:.
c. From the Voice Equipment screen, press (F8) then
(F3).
d. Select Services to Called Numbers from the Assign menu.
e. Press (F2) and select ldg_ni_ca
f. Enter the called number of your choice.
g. Press (F3). A command-output screen appears confirming
your choice.
h. Press (F6) three times to exit to the Voice Equipment
screen.
4. If the phantom extension will be accessed from outside your system,
assign the extension to a Direct-Inward-Dialing number.
5. Provide the Lodging voice mail number to subscribers for the Lodging
application.
Call Coverage Path
A coverage path directs the switch to transfer unanswered calls to a hunt group,
to a service, or to another extension.
When a call goes to coverage, the switch forwards the called number to the
INTUITY system. The INTUITY system detects that the called number is
administered as a specific subscriber’s extension and treats the call as one to be
answered and recorded. Depending on how the extension is configured, the call
may be answered by either the AUDIX or the Lodging application.
1. Administer your switch to assign call coverage for each guest’s extension
to the associated INTUITY system hunt group number.
Voice Equipment
>Voice System Administration
CHG-KEYS
ASSIGN
CHOICES
SAVE
CANCEL