Clearing your configuration – AT&T 2400 User Manual
Page 121
Issue 2 December 1995
A-9
Clearing Your Configuration
Clearing Your Configuration
When you add voice mail ports or change the switch dial plan, you may need to
reconfigure the SID. In most cases, you can accomplish the task by editing the
existing setup and restarting the system. If required, the SID provides the
capability to restore the factory default settings.
To clear your configuration and restore the factory setting, use the following
instructions.
1. Press
to
access the Main Menu.
2. Press
to select the Setup option. After you press the key, you see the
SETUP menu as shown in the following example:
0
3. Press
to
select
Clear. After you press the key, you see the Clear Setup
screen as shown in the following example:
0
4. Press
to
cancel the clear and return to the SETUP menu.
Press
to
restore
the
factory default settings. When you clear your
configuration, you remove all global parameter information, dial plan,
logical terminal number information, and SMDI and MCI serial port
information. The contrast and Enhanced MWI handling settings are
restored to the factory defaults. The only information preserved are your
error logs and statistical tables. Using the clear command stops the
integration. You must configure and start the system to integrate calls.
SETUP
1-Params
2-Ports
3-Clear
4-Advanced
CLEAR SETUP?
1-Yes
2-No
FUNC
4
3
2
1