AT&T System 25 - Manual (Page 166)

SYSTEM TESTS
TEST ATL CORDLESS TELEPHONE
The ATL Cordless Telephone must be tested to see
The transmission quality must be verified when the
separated by the maximum operating distance.
if it functions properly.
base and handset are
Use the documentation provided with the ATL Cordless Telephone to perform
the required tests.
TEST DIAL ACCESS CODES
1. Using a single-line or multiline voice terminal, verify the proper
operation of each feature requiring a dial access code (Night Service
access code).
2. lf any feature is not working properly, verify the translations at the
SAT.
TEST SYSTEM FEATURES
You can test a number of system features from a multiline voice terminal:
Automatic Route Selection (ARS), Station Message Detail Recording (SMDR),
Direct Group Calling (DGC), System Speed Dialing, PDC login, and Call
Coverage. (Note! You can also use a single-line voice terminal to test all of
these features except for Call Coverage.)
ARS and SMDR Tests
If ARS patterns have been translated, you can test the routing by placing
long-distance calls and checking the trunk indicated on the SMDR output. To
use the SAT to print SMDR records,
unplug it from port 1 and attach it to
port 2.
To verify ARS patterns:
1. Determine which long-distance numbers to call by examining the
System Administrator’s ARS patterns.
3-6