AT&T System 25 - Manual (Page 173)

SYSTEM TESTS
TEST DICTATION SYSTEM ACCESS
Place a call to verify that dictation equipment can be accessed. If dictation
equipment has not been installed, this feature cannot be tested.
1.
2.
3.
4.
5.
Use a working voice terminal as the test terminal, and go off-hook.
Dial the access code or PDC, and the number associated with the
dictation equipment.
Verify that ready or talkdown tone is transmitted.
Transmission in
and play it back
Go on-hook.
both direction should be tested. Make a recording
TEST PAGING INTERFACE
Place a test call to each paging zone to verify that paging equipment can be
accessed.
Note:
1.
2.
3.
4.
A t
or
If testing ZoneMate 9 (used with PagePac 20), get an
acknowledge tone. Then dial the zone code, and make an
announcement.
any working voice terminal, go off-hook and dial the access code
PDC for a particular zone.
You may hear a confirmation tone.
Make an announcement into the handset.
— You should hear the announcement
At the calling voice terminal, go on-hook.
from the loudspeaker(s).
Repeat Steps 1 through 3 for all paging zones provided.
3-13