AT&T System 25 - Manual (Page 191)

4. Press the REWIND button, and wait for the unit to
tape. This step ensures that the tape is played from
Note: The system automatically compensates for
“leader” material at the beginning and end of the
Saving Translations
Follow these steps to save
1.
2.
3.
4.
5.
6.
7.
8.
translations on tape:
MAINTENANCE
fully rewind the
the beginning.
the clear
tape.
Complete the steps listed above under “Setting Up the DTU. ”
Press both the RECORD and PLAY buttons
unit should not yet begin to run.)
Log on to the SAT (if not already logged on).
The system displays the main menu prompt:
Make one selection from menu ->.
Enter 9 for the SAVE/RESTORE selection.
The system responds with:
>Action=.
Enter 1.
The system responds with:
Save/Restore: Action= 1 Data=.
Enter D.
The system completes the word Data followed
Enter 1.
The system responds with:
Save/Restore: Action=1 Data=1
W24: YOU ARE ABOUT TO START
simultaneously.
by the = sign.
A TAPE SAVE
Keyboard input is blocked while doing tape operation
c to continue, any other key for abort
(The
4-15