AT&T System 25 - Manual (Page 318)

APPENDIX E:
APPENDIX E:
Administration Codes and Data
The tables in this appendix are intended to help those familiar with system
administration locate specific information without having to refer to the full text in
the Administration Manual.
Default values, if applicable, are indicated in bold print in these tables.
Default Dial Code Assignments
Each time the system is cold started (full-default), default translations are
assigned to ports as shown in the Table below.
Table E-A. Default Dial Codes
PORT DEFAULT CODE
Trunk Numbers (not part of dial plan) 0001-0104
Multiline voice terminals 200-238
300-355
Single-line voice terminals 400-599
Data terminals 600-704
Loop start TAC 100
Ground start TAC 101
Tie trunk TAC 102
Attendant Call Park 800-807
Night Service 810
Modem Request Code 820
(Pooled Modem)
ARS 9
November 1995 E-1