Barco R9003110 - Manual (Page 112)

13. Information
I 2 C diagnostics
fpga backplane1
fpga backplane2
fpga backplane3
ADC layer1
ADC layer2
ADC layer3
Serial eeprom DVI layer2
Serial eeprom DVI layer3
Video decoder
Video indicator
Video Processor
Motor driver
Lamp driver
Device Slave address
Image 13-9
How to display the Lamps and Power supply diagnostics ?
1. Press MENU to activate the Toolbar
2. Press → to select Information
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Diagnostics
5. Press → to select Lamps and power supply (image 13-10)
6. Press ENTER
A textbox appears on the screen.
Image 13-10
13.6 Quick acces keys
What can be done ?
The 3 function keys on top of the RCU can be associated with a particular item in one of the menus.
Each function which is not password protected or does not have a key on the RCU can associated to a function key.
How to get an overview of the quick access keys ?
1. Press MENU to activate the Toolbar
2. Press → to select the Information
3. Press ↓ to Pull down the Information menu
4. Use ↑ or ↓ to select Quick access keys (image 13-11)
5. Press ENTER
A textbox appears on the screen.
108 R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004