Barco R9003110 - Manual (Page 89)

11. Tools
11. TOOLS
Overview
• Source switching mode
• Picture in Picture
• PiP select
• Add window
• Remove window
• PiP Lay-out
• PiP Adjust
• Background
• Logo
11.1 Source switching mode
Switching from one source to another
To minimize undesired effects when switching from one source to another, one can use the Seamless switching mode, beside Seam-
less switching there is a wide choice of several effects which render the source switching transitions more enjoyable.
How to select a switching mode ?
1. Press MENU to activate the Toolbar
2. Press → to select the Tools item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Source switching mode
5. Press → to open the Source switching mode menu (image 11-1)
6. Press ENTER
The logo is displayed
Image 11-1
The Random mode will select a new switching mode at each source switching i.e. there will never be 2 suc-
cessive source switchings with the same effect.
The Seamless switching mode is not used in the Random mode.
Note on Fade in/out
In some cases, depending on the sources to be switched, the fade in/out effect is impossible or may not occur.
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004 85