Barco R9003110 - Manual (Page 79)

10. Settings
Image 10-17
10.7 Runtime warning
What can be done ?
When the lamp has reached a certain predetermined runtime , a warning message will be displayed on the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
lifetime.
How to set the lamp runtime warning?
1. Press MENU to activate the Toolbar
2. Press → to select the Settings item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Lamp
5. Press → to open the Lamp menu
6. Use ↑ or ↓ to select Runtime warning (image 10-18)
7. Press ENTER
A dialogbox is displayed (image 10-19)
8. Use ←or →, the numeric keys on the remote, or the keypad to change the runtime warning setting.
Image 10-18
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004 75