Barco R9003110 - Manual (Page 93)

11. Tools
8. Use ↑ or ↓ to select the desired configuration (image 11-7)
9. Press ENTER
A bullet shows the active layout
Image 11-7
11.4 Add window
What can be done ?
It is possible to add a window to the existing windows (maximum 4), therefore a source must be selected.
Sources which are already used are unselectable. If for instance the PiP layout contains a component video then component video
will be unselectable.
Once added, the window may be altered in several ways to meet particular needs:
• repositioning
• re-sizing
• changing the order
How to add a window ?
1. Press MENU to activate the Toolbar
2. Press → to select the Tools item
3. Press ↓ to Pull down the Tools menu
4. Use ↑ or ↓ to select Picture in Picture
5. Press → to pull down the menu
6. Use ↑ or ↓ to select PiP add window (image 11-8)
7. Press ENTER
The source selection menu is displayed (image 11-9)
In the lower part of the screen appears a wizard in 4 steps (image 11-10)
Image 11-8
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004 89