Barco R9003110 - Manual (Page 21)

3. Installation Guidelines
3.4.3 Lens installation
How to install ?
1. Take the lens out of its packing material
2. Slide the lensdoor to the left (image 3-6)
3. Fix the lens by placing it in the housing
Note: In case of a motorized lens the female jack must be in front of the male jack located in the upper-left part of the housing
in the projector (image 3-7)
4. Push carefully to lock the lens in the housing
5. Slide back the lensdoor to the right
Image 3-6
Image 3-7
3.4.4 Removing the lens
How to remove the lens ?
1. Slide the lens door to the left.
2. Unlock the lens by pulling the handle located on the right side of the projector (image 3-8)
3. Remove the lens out of its housing
Image 3-8
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004 17