Barco R9003110 - Manual (Page 31)

5. Getting started
5. GETTING STARTED
Overview
• Quick startup
• RCU & Local keypad
• Terminology overview
• Switching on
• Lamp runtime
• Quick set up adjustments
• Projector address
• Digital Zoom
• Menu structure
• Using the menu
• Using the Dialogboxes
5.1 Quick startup
The executive RCU
The executive RCU is used for quick acces and allows basic control over the projector.
Dual head setup
In a dual head setup, the two projector are default programmed with respectively projector address 1 and 2.
In order to control the right projector , the executive RCU has to be programmed with the right address.
This done by pressing the numeric key 1 or 2 depending on the projector to be controlled.
1
2
ENTER
BACK
SOURCE
AUTO
IMAGE PIP
B A R C O M GP
PROJECTOR 1
PROJ ADDRESS = 1 PROJECTOR 2
PROJ ADDRESS =
Image 5-1
In case of a single projector setup the projector should respond to address 1.
Otherwise, set the projector address to 1 in the Installation menu.
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004 27