Barco R9003110 - Manual (Page 86)

10. Settings
Image 10-33
Image 10-34
10.11.2 Reset runtime
When to reset the lamp runtime ?
The lamp runtime should only be reset when placing a new lamp.
How to reset the lamp runtime ?
1. Press MENU to activate the Toolbar
2. Press → to select the Settings item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Lamps
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Reset Runtime
7. Press → to open the menu
8. Use ↑ or ↓ to select the lamp to be reset (image 10-35)
9. Press ENTER
A dialogbox is displayed (image 10-36)
10.Use ←or →, the numeric keys on the remote, or the keypad to change the serial number of the lamp (serial number 0000000 will
not be accepted).
82 R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004