Barco R9003110 - Manual (Page 56)

8. Adjustments
• 4:3
• 16:9
• 5:4
• Auto
The Auto function calculates an aspect ratio based on the information stored in the image files.
Selecting Auto in case of a Video source may shrink the image horizontally
How to change the Aspect ratio ?
1. Press MENU to activate the Toolbar
2. Press → to select Adjustment
3. Press ↓ to Pull down the menu (image 8-8)
4. Use ↑ or ↓ to select Aspect ratio
5. Press ENTER to confirm
Image 8-8
The Aspect ratio menu is greyed out in case of a None or Full screen scaling, see "Scaling", page 50
8.8 Positioning
What can be done ?
The pixel start and line start calculated by Autosetup (values can be read in the image file) can be adapted.
This adaptation can be seen as a horizontal (pixel start) and vertical image shift (line start).
How to reposition the image ?
1. Press MENU to activate the Toolbar
2. Press → to select the Adjustments item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select Positioning
52 R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004