Barco R9003110 - Manual (Page 116)

14. Installation
Image 14-1
Image 14-2 Image 14-3
14.2 Projector address
What can be done ?
In some cases the projector address must be changed, for example if an unique RCU is used to control 2 or more projectors.
The projector address setting on the projector must match the setting on the RCU.
What can be changed ?
Within the ’Change Projector Address’ menu, the following items can be changed
• Projector address: address defined by the user, may be from 0 to 255
• Common address : address may be 0 or 1
• RS232 address
How to change the projector’s RC5 address ?
1. Press MENU to activate the Toolbar
2. Press → to select the Installation
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Projector address (image 14-4)
5. Press ENTER
A dialogbox appears on the screen. (image 14-5)
112 R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004