Getting started, Select a projector, Turn the projector on – Barco R9003110 User Manual
Page 32: Select a source
Advertising
5. Getting started
Select a projector
1. Push 1 or 2 to select projector 1 or 2 (image 5-2)
1
2
ENTER
BACK
SOURCE
AUTO
IMAGE
PIP
B
A
R
CO
M
GP
Image 5-2
Turn the projector on
1. Push the standby button on the executive RCU (image 5-3)
It takes about a minute before the projector displays the identification screen (if enabled)
1
2
ENTER
BACK
SOURCE
AUTO
IMAGE
PIP
B
A
R
CO
M
GP
Image 5-3
If the projector doesn’t go in operational mode verify that the main power switch is in the ON position (see
Connections)
Select a source
1. Push the source button (image 5-4)
Each key press moves to the next source.
A box is displayed in the lower part of the image indicating the selected source.
28
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004
Advertising