2 displaying the logo, Displaying the logo, Image 9-1) – Barco R9003110 User Manual
Page 68
9. Input Selection
Image 9-1
How to configure the 5 BNC’s ?
1. Press MENU to activate the Toolbar
2. Press → to select the Input Selection item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select BNC configuration
5. Press → to open the menu
6. Use ↑ or ↓ to select the desired configuration (image 9-2)
7. Press ENTER
The selected configuration is indicated with a bullet
Image 9-2
9.2 Displaying the Logo
Logo
The projector is factory fitted with a standard Barco Logo (SXGA resolution), however it can be replaced by a new corporate logo
using the Take screenshot function.
Logo display is done automatically in case of signal absence under the condition that Background is set to Logo
A standby timer can also be set to put the projector in standby after a predetermined time in case of signal
absence.
64
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004