10 rgb low pass filter, Rgb low pass filter – Barco R9003110 User Manual
Page 60
Advertising
8. Adjustments
Image 8-13
8.10 RGB Low Pass filter
Input filtering
The input section of the projector allows an additional filtering of the RGB signal by means of a 4 level (0–4) filter setup and can
result in a more stable and crisp image, especially with respect to phase stability.
works only on the RGB input
How to set the RGB Low pass filter ?
1. Press MENU to activate the Toolbar
2. Press → to select the Adjustments item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select RGB Low pass filter (image 8-14)
5. Press ENTER
A sliderbox is displayed
6. Use ←or →, the numeric keys on the remote, or the keypad to change the filter level.
56
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004
Advertising