Barco R9003110 - Manual (Page 55)

8. Adjustments
Source Projected image
Name Ratio Resolution Ratio Resolution Particularities
Reality
xga 4:3 1024x768 4:3 1024x768 image centered +side blanked
sxga 5:4 1280x1024 5:4 1280x1024 image centered +side blanked
sxga+ 4:3 1400x1050 4:3 1400x1050 part of the image not displayed
uxga 4:3 1600x1200 4:3 1600x1200 part of the image not displayed
Table 8-1
Scaling method = None in case of a MGP10 projector
The None and the Full screen setting overrule the Aspect Ratio setting.
How to set the scaling method ?
1. Press MENU to activate the Toolbar
2. Press → to select the Adjustments item
3. Press ↓ to Pull down the menu
4. Use ↑ or ↓ to select the Scaling (image 8-7)
5. Press → to pull down the menu
6. Use ↑ or ↓ to select the desired method
7. Press ENTER
Image 8-7
8.7 Aspect ratio
What can be done ?
The aspect ratio setting forces the projector to project an image using a defined aspect ratio.
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004 51