Brother MFC 7550MC - Manual (Page 130)

9 - 8
MFC 4550/6550MC/7550MC
OP-US-5.0
4. Press 8 .
5. Press 6 .
6. Press Z (left arrow) or X (right arrow)
repeatedly until you see MSG CTR OGM.
7. Press Set .
8. Press Record .
9. Pick up the handset.
10. Record a message shorter than 20 seconds.
11. Replace the handset.
The recorded message is played
automatically.
8.SETUP MSG CTR
6 . O G M
MSG CTR OGM
SELECT { } & SET
MSG CTR OGM
R E C / E R A S E / P L A Y ?
PICK UP HANDSET
R E C O R D O G M : 0 0 / 2 0
R E C O R D O G M : 1 5 / 2 0
PLAYING OGM
MSG CTR OGM
SELECT { } & SET
12. Press Stop to exit.
Activating the Message Center Mode
Now that you have selected the type of message storage you need (see page 9-6~7) and
recorded your outgoing message (see page 9-7~8), you are ready to turn your Message
Center Mode on, when you leave your home or office.
To activate Message Center .....
Press Mode on the control panel until both the “Fax” and “F/T”
lights are on.
...Then you can easily identify the Message Center mode that is on by viewing the
Message Center indicator lights.
Fax
F/ T
MESSAGE CENTER MODE SETTINGS
GETTING STARTED