Brother MFC 7550MC - Manual (Page 179)

HOW TO USE THE COPY FUNCTION
12-3
MFC 4550/6550MC/7550MC
OP-US-5.0
Copy
FOR YOUR INFORMATION
What to Do When You Get a MEMORY FULL Message while Making
Copies
When you are making copies, if the memory becomes full and the display
shows PRESS STOP KEY, then press Stop to abort the job.
In this case, you can make only a single copy that is not reduced or enlarged.
NOTE: If you purchase the optional 1 or 2MB of memory for your MFC 4550, the
copy function will include an additional step that allow you to sort multiple
copies.
Sorting Multiple Copies (Only for MFC 6550MC/7550MC)
KEYS TO PRESS
1. Insert the documents.
2. Press Sort .
3. Enter two digits for the number of copies
you want, using the number keys (Max.
99 copies).
Example:
05 .
4. Press Copy .
5. The machine will begin copying.
0 9 / 1 2 / 1 9 9 6 1 5 : 2 5
O N L I N E
FAX: NO. & START
SCAN READY
COPY: PRESS COPY
SCAN READY
S O R T C O P I E S : 0 1
O N L I N E
ENTER & COPY KEY
O N L I N E
S O R T C O P I E S : 0 5
O N L I N E
THE DISPLAY WILL SHOW:
COPY SORT
O N L I N E
COPY SORT P.01
O N L I N E
NOTE: 1. When making Multiple Copies, do not let the receiving tray overstacked.
Remove copied paper from receiving tray frequently.
2. When making Multiple Copies, make sure there is enough recording paper
in the machine.
3. Original documents should be straight, non wrinkled, to be correctly fed.
Otherwise the documents may occasionally jam.