The auto document feeder (adf) -2, Sending faxes – Brother MFC 7550MC User Manual
Page 47
5 - 2
MFC 4550/6550MC/7550MC
OP-US-5.0
Sending FAX
About the Documents You Send...
Do
not
use
documents
that
are
curled,
wrinkled,
folded,
ripped,
or
that
contain
staples,
paper
clips,
paste,
or
tape.
Also,
do
not
use
cardboard,
newspaper,
or
fabric.
NOTICE
DOCUMENT BASICS
SENDING FAXES
The Auto Document Feeder (ADF)
The Auto Document Feeder (ADF) automatically feeds documents (up to 30 pages)
into the machine, one at a time. The thickness and weight of the documents should
fall into the following categories:
Thickness: For one sheet: 2.8 x 10
-3
to 4.7 x 10
-3
inches (0.07 to 0.12 mm).
For multiple sheets: 2.8 x 10
-3
to 3.9 x 10
-3
inches (0.07 to 0.10 mm).
Weight:
For one sheet: 0.07 x 10
-3
to 0.121 x 10
-3
lbs/inch
2
(52 to 85 g/m
2
).
For multiple sheets: 0.07 x 10
-3
to 0.114 x 10
-3
lbs/inch
2
(52 to 80 g/m
2
).
As a reference, please note that the paper used for this manual has the following
thickness and weight:
Thickness: 3.1 x 10
-3
inches (0.08 mm)
Weight: 0.091 x 10
-3
lbs/inch
2
(64 g/m
2
)
Before inserting documents into the document feeder, fan the sheets of paper to make
sure the documents are not stuck together. Then tap the leading edge on a flat surface
so all the pages are even when placed in the feeder. Make sure you always place the
documents in face down.
NO!
wrinkled
curled
folded
ripped
staples
paper clip
tape
fabric